产物分类
友谊链接
接洽咱们
威卡wikaPGT23.063 带波登管的负担表
威卡wikaPGT23.063 带波登管的压力表
产物简介： 智能型波登管压力表带电旌旗灯号输入，不锈钢系列，宁静型，表圆直径 63
型号：PGT23.063
华拓机电无限公司德律风: 010-58461273 手机: 15330223273 传真:01064160267 地点: 北京市向阳区东直门外大巷18楼223室 邮编: 100027
应 用
Acquisition and disp
武汉博朗宁创新科技无数公司
按照先容：
智能型波登管压力表带电旌旗灯号输入，不锈钢系列，宁静型，表圆直径 63
型号：PGT23.063
华拓机电无限公司
传真:
地点: 北京市向阳区东直门外大巷18楼223室
邮编: 100027
应 用
Acquisition and display of process values
Transmission of process value to the control room, 4 ... 20 mA
Easy-to-read, local analogue display needs no power supply
Safety-related applications
出格功效
„Plug and play“ means no configuration necessary
Measuring ranges from 0 ... 1 bar to 0 ... 600 bar
Easy-to-read, nominal size 63 analogue display
S3 Safety pressure gauge per EN 837-1
intelliGAUGE Model PGT23.063
详 细
Nominal size in mm
63
Accuracy class
1.6
Scale ranges
0 … 1 up to 0 … 600 bar
or all other equivalent vacuum or combined pressure and vacuum ranges
At any point with limited space, where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the model PGT23.063 intelliGAUGE can be used.
Through the combination of a mechanical measuring system and electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The model PGT23.063 intelliGAUGE fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for the mechanical pressure indication can thus be saved.
The model PGT23.063 is built upon a high-quality, stainless steel pressure gauge in safety pattern version model 23x.30 with nominal size of 63. The pressure gauge is manufactured in accordance with EN 837-1.
The durable, fully-welded Bourdon tube measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the pressure-proportional, 4 ... 20 mA electrical output signal is produced.
The electronic WIKA transmitter, integrated into the highquality mechanical pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.
The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the
63
Accuracy class
1.6
Scale ranges
0 … 1 up to 0 … 600 bar
or all other equivalent vacuum or combined pressure and vacuum ranges
At any point with limited space, where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the model PGT23.063 intelliGAUGE can be used.
Through the combination of a mechanical measuring system and electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The model PGT23.063 intelliGAUGE fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for the mechanical pressure indication can thus be saved.
The model PGT23.063 is built upon a high-quality, stainless steel pressure gauge in safety pattern version model 23x.30 with nominal size of 63. The pressure gauge is manufactured in accordance with EN 837-1.
The durable, fully-welded Bourdon tube measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the pressure-proportional, 4 ... 20 mA electrical output signal is produced.
The electronic WIKA transmitter, integrated into the highquality mechanical pressure gauge, combines the advantages of electrical signal transmission with the advantages of a local mechanical display.
The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the
scale over the full display range corresponds to 4 ... 20 mA.